Terry Rayon Classic Dress Pants - Premium [TR Trousers] - $45.00 : Makeyourownjeans.com, Custom Jeans

Product 6/8

Please Choose:

Name of the person for whom these jeans are to be made.

For

Gender

Fit

Unit

Measure and just mention the waist you want, it also depends on how high or low you wear your pants, you should measure the area where you want your jeans to sit. Make sure the tape is snug, but not pulling tightly, and not too loose.
Measure over jeans or similar clothing.

(Do NOT mention your label size, measure your waist according to the instructions above, readymade jeans are always more than their label sizes and vary from brand to brand)

Waist

Seat is the widest part of the area in the picture next to you. Keep the measuring tape here and the area which gives the maximum measurement is the "SEAT" required..

Seat

For the Thighs you can give your Body Measurement or Fix Measurements.
Choose your option below and read the respective instructions.
If you select FIX measurements be sure to add the word FIX after the thigh measurement

Determine the widest part of your thigh and measure according to the picture , we will leave our standard loosing, we leave the loosing according to the fit you choose, for example if you choose Baggy we leave much more loosing than say for a Bootcut fit which is supposed to be fitting in the thigh area.

Thighs

Stand straight and measure around the circumference of the knee joint, we will give the appropriate loosing.

(If you want us to make the jeans with a particular knee measurement just type the word FIX after the knee measurement, eg: 18 FIX (this may be from your favorite pair of Jeans), we will manufacture the Knee part of the jeans with this particular measurement.)

Knee

Measure the length from the waist to the floor or the length you want, you should measure the length while wearing you shoes.

To get more accurate measurements measure the outer length of your existing jeans and input the length which you find greater.

Please note this is outer length and NOT inseam.

Length(Outer)

I reconfirm that the length I have submitted above is OUTER length and not Inseam.

Confirm Outer Length

Yes

Front Rise
We can keep the front rise according to our expert's knowledge, but giving this measurement makes your Jeans more accurate, we recommend you to give this measurement.
Measure from the top of your front waistband to where all the seams meet at the crotch.
Make sure the tape measure is comfortable.
With your hand under your crotch grab the tape measure wear you feel your crotch seams meet.
We can make any rise, so feel free to give measurements of Low rise or Ultra lowrise, high rise or anything in between.

Front Rise

Back Rise
We can keep the back rise according to our expert's knowledge but if you want a certain back rise measurement you can specify it here.
Same as the front but now in the back. Measure from the top of your waistband at the back straight down to where the seams meet.

We will increase/decrease the back rise incase we feel that it seems a bit incorrect, however if you are very sure of your back rise just mention in the comment box that you want the back rise as specified.

Back Rise

Rise
Where do you wear your jeans, this determines the Rise.
Normal(On Waist): When you wear your jeans on the belly button.
Mid Rise: When you wear your jeans just below the belly button.
Low Waist: When your wear jeans below the belly button, this is mostly about 2 inches below the belly button.
High Waist: When you wear your jeans above the belly button.
If you have given the rise measurement then we will only consider that.

Rise

You can give the leg bottom measurements you want, else we
will make it according to the fit you have choosen above.

Example: 12 One Side OR 24 All Round

Leg Bottom

The Weight and Cost increases as the waist size increases, we charge only for the extra shipping and material accordingly (Please choose the appropriate to avoid delay in your order)

Add Info

Pleats